Simple to use, yet packed with features!


Product Description

The MicroStar Series is one of the most flexible product lines we offer. Simple to use, yet packed with features, the MicroStar Series power supplies are designed to be used in almost any general metal finishing application.

  • Features
    • Multiple options for control interfaces
    • Small package size: switch mode technology
    • Rugged, environmentally-sealed, powder-coated enclosure
    • Real Time Cycle Control
    • Ampere Time Cycle Control
    • Ampere Time Totalizer
    • Constant current, constant voltage, and cross-over regulation modes
    • FrontPanel+ Host Control Program for process set-up generation and process storage/data logging
    • RS485 and USB ports for computer control
    • Electronic overload, over-temperature, and short circuit protection
    • Save/recall up to 10 different process steps
    • Force air cooled
  • Specifications
    • Current outputs from 10 to 300 amperes at 9 to 48 volts DC
    • Line Regulation: +/- 1% of setting or 0.1% of maximum rating, whichever is greater
    • Load Regulation: +/- 1% of setting or +/- 0.1% of maximum rating, whichever is greater
    • Digital meter accuracy: +/- 1% plus L.S.D.
    • Temperature stability: 0.2% of peak rating after 15 minute warm up
    • Ripple: <1% RMS of maximum rated output voltage
  • Options Available (consult factory)
    • Analog interface board: 4-20mA, 0-5V, or 0-10V
    • Auxillary totalizer with relay output to turn on/off pump, mixer, etc.
    • Master/Slave control - synchronize multiple units
    • Ramp timer
    • Recipe creation and storage
    • Periodic reverse output
    • Remote MicroStar control interface panel
    • Trickle current
    • Rack mount flange kit

Related Products