Simple to use, yet packed with features!


Product Description

The MicroStar Series is one of the most flexible product lines we offer. Simple to use, yet packed with features, the MicroStar Series power supplies are designed to be used in almost any general metal finishing application.

  • Features
    • Microprocessor-based programmable controls
    • Selectable current, voltage & crossover regulation modes
    • Rugged, environmentally-sealed, powder-coated enclosure
    • Save/recall up to 10 different process steps
    • Real Time Cycle Control
    • Ampere Time Cycle Control
    • Ampere Time Totalizer
    • Error signals for over-temperature, locked fan rotor, output out-of-tolerance and power failure/brownout conditions
    • Calibration capability through the control interface
    • Digital input for inhibit/operator control
    • FrontPanel+ Host Control Program for process set-up generation and process storage/data logging
    • RS485 and USB ports for computer control
    • Forced air cooled (larger models are water cooled)
    • Straight DC and Choice of Low Frequency Pulse or High Frequency Pulse Output:
      • High Frequency Pulse (0-5000 Hz)
        • 0 - 40 volts average (DC) or peak (pulsed) voltage
        • 0 - 250 amps average current (or maximum DC current)
      • Low Frequency Pulse (0-200 Hz)
        • DC to 200 Hz pulses (at an 80% duty cycle)
        • Minimum Pulse Width: 4 milliseconds ON, 1 millisecond OFF (80% duty cycle)
        • Typical Pulse Rise Time: Less than 1500 milliseconds
        • Typical Pulse Fall Time: Less than 1000 milliseconds
  • Specifications
    • Current outputs from 5 - 250 amperes average at 10 to 40 volts DC
    • Line Regulation: +/- 1% of setting or 0.1% of maximum rating, whichever is greater
    • Load Regulation: +/- 1% of setting or +/- 0.1% of maximum rating, whichever is greater
    • Digital meter accuracy: +/- 1% plus L.S.D.
    • Temperature stability: 0.2% of peak rating after 15 minute warm up
    • Ripple: <1% RMS of maximum rated output voltage
  • Options Available (consult factory)
    • Analog interface board: 4-20mA, 0-5V, or 0-10V
    • Auxiliary totalizer with relay output to turn on/off pump, mixer, etc.
    • Master/slave control - synchronize multiple units
    • 19" rack mount flanges
    • Ramp timer
    • Recipe control
    • Relay Output
    • Remote MicroStar Control
    • Trickle current

Related Products