Simple to use, yet packed with features!


Product Description

The MicroStar Series is one of the most flexible product lines we offer. Simple to use, yet packed with features, the MicroStar Series power supplies are designed to be used in almost any general metal finishing application.

  • Features
    • System Output: DC or Low Frequency Pulse (LFP)
    • Multiple options for control interfaces
    • Small package size: switch mode technology.
    • Rugged, environmentally-sealed, powder-coated enclosure
    • Real Time Cycle Control
    • Ampere Time Cycle Control
    • Ampere Time Totalizer
    • Constant current, constant voltage, and cross-over regulation modes
    • Calibration capability through the control interface
    • Digital input for inhibit/operator control
    • FrontPanel+ Host Control Program for process set-up generation and process storage/data logging
    • RS485 and USB ports for computer control
    • Electronic overload, over-temperature, and short circuit protection
    • Save/recall up to 10 different process steps
    • Forced air cooled
    • Low Frequency Pulse Output Capability:
      • DC to 200 Hz pulses (at an 80% duty cycle)
      • Minimum Pulse Width: 4 milliseconds ON, 1 millisecond OFF (80% duty cycle)
      • Typical Pulse Rise Time: Less than 1.5 milliseconds
      • Typical Pulse Fall Time: Less than 1.5 milliseconds
  • Specifications
    • Current outputs from 500 - 1000 amperes average at 10 to 20 volts DC
    • Line Regulation: +/- 1% of setting or 0.1% of maximum rating, whichever is greater
    • Load Regulation: +/- 1% of setting or +/- 0.1% of maximum rating, whichever is greater
    • Digital meter accuracy: +/- 1% plus L.S.D.
    • Temperature stability: 0.2% of peak rating after 15 minute warm up
    • Ripple: <1% RMS of maximum rated output voltage
  • Options Available (consult factory)
    • Recipe creation and storage
    • Remote control interface panel
    • Analog interface board: 4-20mA, 0-5V, or 0-10V
    • Auxiliary totalizer with relay output to turn on/off pump, mixer, etc.
    • Master/slave control - synchronize multiple units
    • Ramp timer
    • Trickle current
    • 19" rack mount flanges

Related Products